Dutch Oven Potatoes (+ The Oven Recipe) • Longbourn Farm (2024)

FAQs

How long to bake a potato at 400 in a convection oven? ›

As a general guide line with the convection oven you can bake the potatoes at 375 degrees F versus a higher temp in a conventional oven. Still, I have found 400 degrees F for 55-60 minutes works well and the potatoes are fully cooked when they reach 210 degrees F.

We recommend baking potatoes at 400 degrees F for about an hour. Smaller spuds might take a little less time, while larger baking potatoes over 1 pound might take a little more. For a fully baked Idaho Russet Burbank, the internal temperature should be right at 210 degrees F.

Yes! Soak the potatoes in cold water to remove the excess starch from the outside of the potato. There are a few reasons why you want to remove that starch (it makes the potatoes burn, it keeps them from crisping up, it turns to sugar) but all you really need to remember is to soak them at least one hour.

Use dish soap and a nylon scrubbing pad or the scrubby side of a kitchen sponge to remove any food or residue that's left and rinse well with running water. Never use steel wool or steel sponges! Dry immediately with a dishcloth and heat. If water sits on a cast iron Dutch oven it can cause surface rust.

Dutch ovens are oven-safe, making them ideal for braising meat or baking bread. If you're baking on high heat, beware: your pot is probably heatproof, but the knob on the lid often has a heat limit below 400º. Simply twist off the knob and bake without it, or use a metal knob.

Sans the foil, chefs typically coat the outside of the potatoes with some olive oil. As briefly mentioned, drizzling the well-seasoned outer shell with olive oil creates an even crispier outside that compliments the extra fluffy inside of the potato.

According to Restaurant Ninjas, restaurants that serve baked potatoes bake their potatoes in advance and keep them in warming equipment. Moreover, there is a constant cycle of new potatoes going out to ensure the food is fresh.

The phrase “baked potato” typically refers to a whole potato being cooked in the oven with the intent of being cut open and stuffed (commonly with butter, sour cream, cheese, etc.). Roasted potatoes, on the other hand, are cut into smaller pieces and cooked in the oven until they're perfectly crispy on the outside.

NEVER BAKE POTATOES IN FOIL.

Foil wraps will not decrease baking time, but will result in a soggy potato interior with wet skin.

Visual signs: The potato skin will start to wrinkle when over cooked. The potato, when wrapped in foil or placed on the bottom of a pan will have a dark brown spot on the bottom, a sure sign of over cooking. Foil traps the moisture in the potato causing the skin to be wet and the inside flavorless or gummy.

What is the best temperature for baking potatoes? ›

Potato baking temperatures range from 350˚ to 450˚F. The sweet spot seems to be at 400˚F, a temperature that cooks the potato all the way through and crisps the skin without singeing it. That said, you don't need to strictly adhere to a certain temperature every time you bake a potato.

Soaking potatoes in water helps remove excess starch. Excess starch can inhibit the potatoes from cooking evenly as well as creating a gummy or sticky texture on the outside of your potatoes. Cold water is used because hot water would react with the starch activating it, making it harder to separate from the potatoes.

To help prevent foodborne illness caused by harmful residue, it's vital that you clean potatoes, even if you plan on peeling them. When leaving the skin on—like for a baked potato—it's important to properly clean potatoes even if you don't plan on eating the skin.

First let's talk about why cut potatoes need to be immersed in water to begin with. The reason is to prevent the potatoes exposure to air, which causes dehydration, oxidation, and discoloration. Immersing cut potatoes will also help rinse off excess starch.

Yes, you can boil water safely in enameled cast iron. Enameled cast iron does not require seasoning, unlike traditional cast iron. The enamel coating is incredibly durable. Water boils at 212º and you can safely heat enameled cast iron to 400º to 450º.

The most common reason food sticks to cast iron is because the pan is simply too hot. Because cast iron retains heat much better than other types of cookware, you generally don't need to use as high of a heat setting as you normally would with stainless steel or aluminum cookware.

Soaking cast iron in water is a recipe for rust. If you need to remove sticky or stubborn stuck-on food, use a nylon scrubbing brush or a pan scraper and rinse under warm water. Be sure to thoroughly dry your pan. Note: If you do accidentally leave your pan in water for too long and it develops rust, don't panic!

Place potatoes 5 1/2-quart Le Creuset with cold water to cover. Bring to a boil, lower the heat and simmer, covered, for 25-35 minutes, until the potatoes are completely tender (the easiest way to test if they are ready is to pierce with a fork). Drain.